Opener Programming

\r\n
\r\n

\r\nTEST your Garage Door Opener \r\n

\r\n
    \r\n
  • Enter your PIN.
  • \r\n
  • Press the button with the arrow up / arrow down triangles.
  • \r\n
\r\n

\r\n  
\r\nRESET /CLEAR your keypad
\r\n   (Starting over, Forgot PIN or Changing PIN) \r\n

\r\n
    \r\n
  • Press and hold the PROG button. Keep holding while you -
  • \r\n
  • Press and hold the 6 button. Keep holding while you -
  • \r\n
  • Press the key with the arrow up and arrown down triangles.
  • \r\n
\r\n

\r\n
\r\nSET Your Wireless Keypad PIN \r\n

\r\n
    \r\n
  • Press the following keys in this order: [3]  [5]  [7]  [PROG]
    \r\n - Red LED blinks -once per second.     
  • \r\n
  • Enter your PIN (3 to 8 characters).
  • \r\n
  • Press the [PROG] key again.
    \r\n   -Red LED blinks - twice per second and turns off.
  • \r\n
\r\n
\r\n

\r\nPROGRAMMING Door Opener(s):
\r\n  Before you begin be aware of the following: 
\r\n    For Convenience: Program your keypad BEFORE mounting.
\r\n    Program Failure: If programming fails at any point CLEAR/RESET your keypad. 
\r\n    Locate the [Learn Code] button and the [Learn Code] red LED indicator. \r\n

\r\n

\r\nProgramming ONE Door Opener \r\n

\r\n
    \r\n
  • Press the [Learn Code] button once. - The red LED indicator will blink.
  • \r\n
  • Enter your PIN.
  • \r\n
  • Press the button with the arrow up / arrow down triangles
    \r\n -The Learn Code Indicator LED will stay on.
  • \r\n
  • Press the button with the arrow up / arrow down triangles a second time. -The Learn Code Indicator LED will turn off.
  • \r\n
  • Press the button with the arrow up / arrow down triangles a third time.
    \r\n -Garage Door should now move.
  • \r\n
\r\n

\r\n
\r\nProgramming 2 or 3 Door Openers \r\n

\r\n

\r\n(All Door Openers will use the same PIN) \r\n

\r\n

\r\n \r\n

\r\n

\r\nAdditional Assistance:
\r\n
\r\nShould you need additional information please contact our customer service department at
\r\n1-800-275-6187. \r\n

\r\n
\r\n